Download the new application DESMOPOL in which it will find all the information about our product.

TO UNLOAD APPLICATION DESMOPOL

After there develops the polyurea system 100 % pure TECNOCOAT P-2049, Tecnopol Sistemas takes pleasure in presenting the new catalog where there are exhibited the properties of this novel product that will mark an inflection point in the till now known waterproofing processes:, the only bicomponent membrane of exceptional properties for the waterproofing, graze, resistance to the haulage, wear, big power of elongation and a drying to the tact of only 4 seconds.

The polyurea is a bicomponent membrane proyectable, 100 % solid and not harmful to the environment, 100 % impermeable and that protects the surfaces of the wear and the corrosion.

Due to his high adhesion it allows multiple substrata a sure and permanent union with the surface, achieving that this one stays free of oxidation or corrosion with a finished one that can be anti-skid and in several colors. It is an extremely lasting recovering due to his mechanical properties and to his chemical qualities. This highly resistant recovering tolerates also the damages that there could cause different acids and alkaline chemists,
as well as products by means of oil. It is provided with excellent behavior and is bacteriológicamente stably, easily to clean and capable of sealing meetings and corners.

All these characteristics do of TECNOCOAT a modality in what it refers to waterproofing, differing clearly from all the products known till now.

CERTIFICATIONS AVAILABLE FOR TECNOCOAT

Certificate for contact with drinking waters:

The certificate Applus for TECNOCOAT P - 2049 concludes that the material is consent, as for the analyzed parameters, to the requisites established in the Royal decree 140/2003. Also it is appreciated that chemical reaction of the product is not observed to 20 ppm of chlorine, the product is consent with regard to this parameter to the requisites of the Royal decree 140/2003.

Certificate SAY EUROPEAN DOCUMENT OF TECHNICAL SUITABILITY TO YOURSELF:

This document constitutes for definition a favorable technical evaluation of the suitability of a product for the use assigned, based on the fulfillment of the Essential Requisites foreseen for the works in which the above mentioned product is used. TECNOCOAT P-2049 possesses the European certification SAY TO YOURSELF for a useful life of 25 years.

Download here the catalog of the Polyurea TECNOCOAT P-2049

<The liquid membranes of polyurethane DESMOPOL are products that once applied, polimerizan giving place to a flexible revetment in the shape of adherent layer, forming a membrane of completely impermeable polyurethane.
Lasting and resistant to the U.V. and climatic agents, they guarantee the watertightness of the covering. The system
DESMOPOL is compatible with most of protections for the transitabilidad, being able to obtain like that, decorative covering or with requests of a more intensive use. Next we detail advantages and technical information of our membrane of polyurethane Desmopol:

DESCRIPTION
The product is a liquid material by means of a pure elastómero of polyurethane that produces a continuous and flexible membrane, which properties make her excellent for his application in all kinds of surfaces.

ADVANTAGES

• it does not produce bubbles even in thick applications.
• it does not need priming in most cases.
• Easy application.
• Rapid healing even in winter.
• Excellent adhesion especially type of surfaces.
• High resistance to the chemistry.
• High resistance to extreme temperatures (understood between-40 ºC and + 80 B.C.).
• High resistance to the graze and to the tension.
• Big elasticity.
• The membrane is completely impermeable.
• It Allows the diffusion of the steam.

APPLICATION
monocomponent Product that can be applied by roller, paintbrush and gun airless, without need for priming.

It can be applied in cold, and humid time. The rain before his entire drying does not affect to the quality of the membrane, although the force of the impact can leave marks "craters" in the movie, being able to be the application of another layer for the regularization.

SYSTEMS

• passable Covering particular use.
• passable Covering intense use.
• landscaped Covering.
• It Skims off polyurethane.
• civil Work.
• Humid zones.
• Deposits.

LIMITATIONS
Not recommended for swimming pools waterproofing in contact with water treated chemically.
Recommended supports:
Concrete, cement, mosaic, fibre - cement, tiles, rehabilitations of acrylic and asphalt, wood, rusty metal, galvanized steel.

CONDITIONS OF APPLICATION

• application Conditions to the support (Standard)
• Hardness: R28=15 MPA
• Moisture: W <10 %
• Temperature: Of 5ºC to 35ºC
• relative Moisture: <85 %

COMPLEMENTS

• the DESMOPOL the first as priming in:
• Dry and porous Support (Concrete, ceramics...)
• humid Support.
• Support Vitrificado.
• Mosaic Support.
• Support Marble.
• Support asphalt Emulsion.
• Support Madeira. Not necessary
• Support Steeled.
• Support galvanized Steel. To consult
• Support Steeled lacquer.
• Support Plate PVC.

I CONSUME

• The yields of the product there is from 1,5 to 2 Kg./m2 to 1,4 mm of thickness, applied in 2 layers.

PRESENTATION

• 6 and 25 kg metallic Packings

COLORS

• dark Gray, tile, target

STABILITY OF THE PACKING

• 12 months to a temperature of 5 ºC to 25 ºC in situated dry. If the bucket is opened it must be used immediately.

CLEANLINESS

• The cleanliness of the materials is realized by dissolver desmopol or xileno purely.

TRANSPORT AND STORAGE

• Request our precautionary plate.

CLASSIFICATION ACCORDING TO THE GUIDE EOTA

CONCEPTS VALUE CLASSIFICATION

• Minimum was guaranteeing of time of life of product: 10 years W2
• Climatic zone: Severo S
• covered Inclination: <5 % S1
• minimal support Temperature:-20 ºC TL3
• Maximum support temperature: 60 ºC TH2

TECHNICAL INFORMATION OF THE LIQUID PRODUCT 95 % DRY MATTER IN XIOL

UNITS PROVED METHOD
Stickiness: Cp ASTM D2196-86 2500
Specific gravity: gr./cm3 ISO 2811 / dough 53 217 / ASTM D1475 1,3-1,4
Flash point: ºC ASTN D93, closed Cup 42
Repainted: Hours---------------6 to 24
Drying to the tact to 25ºC - 55 % UR: Hours---------------6

TECHNICAL INFORMATION OF THE MEMBRANE IT LIQUIDATES OF POLYURETHANE DESMOPOL

UNITS PROVED METHOD
Temperature of Service: ºC---------------------------------40 a80
Temperature of SOC: ºC-------------------------------------200
Hardness: Shore D ISO R868/DIN 53 505/ASTM D2240 70
Resistance to the Haulage to 23 ºC: Kg./cm2 (N/mm2) DOUGH 52455/ASTM D412 55
Percentage of Elasticity to 23 ºC: % DOUGH 52455/ASTM D412> 600
Percentage of Elasticity to-25 ºC: % ASTM D412 450
Transmission of water vapor: gr./m2.HR ASTM E96 (Method waters down) 0,8
Adhesion to the concrete: Kg./cm2 (N/mm2) ASTM D4541> 20 (> 2)
QUV Resistance Best outdoors to 4 hr UV, to 60 ºC (UVB lamp) and 4nr COND to 50ºC

- The admissible supports:
Mortars
Concrete
Tiles, tiles, etc

- The reinforcement armor:
Armor of reinforcement of fiberglass
Armor and reinforcement of Polypropylene

- The primings and the preparation of the surface:
Surfaces with few porosity.
Porous surfaces
Humid surfaces
Leveling out

- The membranes you liquidate of waterproofing possible:
DESMOPOL, DESMOPOL-T, DESMOPOL ADY, SETIPOL

Tecnopol will present his novel products for waterproofing and isolation as well as the machinery in the new edition of the fair Construmat that celbrará in Barcelona the included days from May 16 until May 21, 2011.
In our stand they will be able to know the systems of last generation for waterproofing TECNOCOAT as well as the system VYDRO for ecological covering.

They will be able to find us in:

PALACE 3
LEVEL 0
STREET C
STAND Nº 327

Tecnopol presents the tariff of prices of machinery and spare for thermal isolation with froth of polyurethane and waterproofing with polyureas and membranes of polyurethane.

Given the complex economic moment through that the sector is living, our signature contributes actively thinking about the final client offering an important discount in all the articles about the marks Graco, Gusmer and Glascraft.

In the tariff updated to June, 2012, they will find more than 50.000 references of spares to machinery of foam projection of polyurethane, waterproofing with polyurea P-2049 and membranes of polyurethane Desmopol, as well as all the spares of projection guns of Polyurea and Polyurethane, bombs of move, hoses, etc.

The pure polyurea 100 % projected TECNOCOAT P-2049 is an elastómero of two components that once applied provides a recovering impermeabilizante without meetings of high given resistance his high thickness. His properties convert to the pure polyurea 100 % TECNOCOAT P-2049 into the ideal solution to waterproof those places where the continued step of the water or enclosed chemicals can create filtrations. The rapid reaction of the pure polyurea, on having been applied, 100 % TECNOCOAT P-2049 provides the stability in only 4 seconds being able to be journeyed and guaranteeing the properties of waterproofing in a period lower than 3 a.m. This membrane impermeabilizante his passed ideal conditions aproximadamnete 24 hs

Unloads here the catalog of the Polyurea TECNOCOAT P-2049

PROPERTIES OF THE SYSTEM

• § The membrane to waterproof TECNOCOAT P-2049 is a product of big hardness and resistance against the wear that once applied. in moisture conditions, it offers a big stability and durability.
• § The membrane impermeabilizante TECNOCOAT P-2049 is an immune product to the changes of temperature between-40th and +180º preserving his flexible properties without suffering either breaks or softenings.
• § The rapid reaction of the poliureapura, on having been applied, 100 % TECNOCOAT P-2049 provides a stability in seconds being able to be journeyed and guaranteeing the properties of waterproofing in a period lower than 3 hours. This pure polyurea obtains his ideal conditions passed approximately 24 hours.
• § The versatility of the pure polyurea TECNOCOAT P-2049 and his drying in 4 seconds, they provide to him the possibility of adapting themselves on any surface turning it into the ideal product to be applied in irregular areas with forms of any nature be already curved or squared.
• § the variety of colors in which there is presented the polyurea TECNOCOAT P-2049 is very wide, providing to the client the polyurea in the wished color already formulated avoiding to have to apply in situ the color pigment.
• § With the application of the polyureas TECNOCOAT P-2049 they save themselves together and any type of union since the finished one is uniform and of only one piece, providing a surface very easy to clean.
• § The contact with fuels, fertilizers, excrement or animal rusts neither moderates nor corrodes to the polyurea P-2049.
• § The properties of the membrane impermeabilizante TECNOCOAT P-2049, allows to adhere to any surface like cement, concrete, polyurethane, wood, metal... also, for his high resistance it can be passable and anti-skid applying a finished rough one.
• § The pure polyurea 100 % TECNOCOAT P-2049 is not not sonorous considered paving, and still that is not thought for this use, has a good acoustic behavior.
• § In facilities type siloes, swimming pools, deposits or ponds etc. in which tubieran that to store purines, provide an entire waterproofing and protection opposite to the corrosion.

APPLICATIONS OF THE POLIUREAPURA TECNOCOAT P-2049

The polyurea TECNOCOAT P-2049 is applicable on a long list of surfaces, the most common applications and therefore more recommended are, the froth of polyurethane, the fiberglass, the wood, ceramic, the metal, concrete etc.

• Like revetment that he provides with the external and internal agents much adapted for tubes of water conduction, chemicals, sewerage, gas, etc.
• For the swimming pools construction cross, indicated especially for the effective waterproofing of gardens, covering, landscaped covering and other constructions outdoors.
• For superfícies passable that need to be waterproofed like covering or patios, also much indicated for the anticorrosive treatment in case these are metallic, in the polyurethane foam protection outdoors or to encapsulate fibrocemento.
• In passable places as commercial facilities párkings and industrial ships where it is necessary to give a paving that is very resistant, impermeable and simultaneously antistatic
• to avoid filtrations in containers that contain chemicals or corrosive avoiding escapes that damage the environment or harm the persons.
• In industries where is a finished hygiene essential for being a continuous recovering, bacteriológicamente stably and resistantly to the wear as well as to diverse corrosive products.
• For a treatment impermeabilizante of pictures or electrical closets for having antistatic properties and without interfering with the components. Much indicated to avoid the statics accumulation in stores of explosives, elevators, operating theaters of hospitals and places that should be free of this type of charges.
• In all kinds of facilities aquaticas, of free time, picifactorías or aquariums providing a sure and lasting waterproofing.

TEAM RECOMMENDED FOR THE PROJECTION OF POLIUREA TECNOCOAT P-2049:

For the application of this product it is necessary to obtain a team with the following components and accessories:

1. I Equip with high pressure projection with gun of miscellany, calefactadas hoses and agitator of products (to see catalog of machinery Tecnopol).
2. electrical Compressor.
3. autonomous Team of respiration for every applicator
4. protection Material (finished suit, wedges, diving-suit...)
5. generating Group to obtain an entire autonomy.

To obtain ideal results it is necessary to bear in mind that the necessary team must take the following technical characteristics as a minimum.

• it Has to be capable of reaching them and to last 77ºC and 80ºC
• it Has to be capable of reaching and of supporting pressures of at least 2500-3000 p.s.i. / 170 - 205 bars.

It is essential that the select team supports the stability of the parameters above described since this way there is guaranteed a finished correct one of the polyurea P-2049, otherwise the possible instability of a team of minor services can provoke not uniform miscellany of two components with what the polyurea P-2049 neither will recover he will not even adhere on the surface uniformly.

Also for the preparation of the surface or substratum where there is going to apply the pure polyurea to himself 100 % TECNOCOAT P-2049 it is necessary to bear in mind that it is necessary to have the teams necessary for the preparation of the substratum:

• Teams of cleanliness (water jet, hoover...)
• Teams for mechanical stripping (sander, granalladora...)
• Teams of thermal treatment (air dryers, dehumidifiers...)
• Guns and accessories to apply primings, alifáticos and arid

Only the strict fulfillment of the norms of maintenance of cleanliness and repair of the teams provided by the technical staff will guarantee the correct conservation and functioning of the system.

For the use of the teams with different products (polyurethane froth...) is necessary to bear in mind the exhaustive cleanliness that owes relazar of the team, the method to obtain a few ideal results will be provided by the technical service.

Tecnopol puts at the disposal of his clients the new catalog of products and membrane applications of polyurethane for impermeablización, polyureas, systems of polyurethane for thermal isolation and machinery for the application of polyureas and projected polyurethane, in him they can find the systems adapted for every application as well as the technical specifications of all the products Tecnopol. The new catalog is the perfect tool to find solutions for the waterproofing and isolation so much for individuals as professionals of the sector.

Into this linkage our catalog can discharge

Tecnopol has renewed with Bureau Veritas the certificate of the system of polyurethane G-2049 for thermal isolation in construction, fulfilling the requisites of the norm JOINS 92120-1, to be able to guarantee to our clients the quality of our products of projected polyurethane. The rigid polyurethane froth is a plastic material of cellular composition used like thermal and acoustic insulator and like impermeabilizante, that facilitates the fulfillment of the technical code.

HANDI FOAM is a portable team of foam projection of two components that allows to the professionals to produce froth of polyurethane of an extraordinary quality of rapid and simple form, where and when it is needed. HANDI FOAM is designed to apply froth selladora projected in situ, forming an insulating barrier for the control of air infiltrations and the isolation of fissures, cracks, hollows and unions in the closings of the building. It serves to seal conduits, elbows, valves, unions in T and derivation boxes, and to replace or to repair isolation of containers and cold-storage rooms. it acts like insulator, muffles the noise, the structural resistance increases, it provides sealed hermetically and refills the hollows.

HANDI FOAM is used in the sealed one perimetral of doors and windows, intersections between walls and roofs and step of tubes across walls, soils, roofs, attics and roofs.

HANDI FOAM adheres to most of surfaces, including surfaces of wood, metal, masonry, glass and the majority of plastic.

The kit HANDI FOAM consists of two deposits to pressure, joined by means of pipes to a gun aplicadora. On having applied the content of two deposits, a chemical reaction takes place and there is generated a frothy substance, which expands quickly up to reaching between three and five times the volume of the applied product. The froth hardens in approximately 60 seconds and takes five minutes, approximately, in drying off completely and to acquire a permanent solid configuration.

The dry froth resists the moisture, acts like insulator, muffles the noise, the structural resistance increases, it provides sealed hermetically and refills the hollows.

Handi Foam

GUN APLICADORA

It is a question of a patent, light and resistant gun of plastic, provided with a very comfortable handle. The product exit is controlled by means of a shooter sensitive to the tact. The exact measurement of the quantity of product reduces the risk of projecting an excessive product quantity and of wasting it. The gun is provided with a safety mechanism, which avoids the accidental discharge of the product. The ejector who incorporates turns the replacement of the mouthpieces into a very simple operation.

MOUTHPIECES APLICADORAS TO TEST OF REACTION

The mouthpieces to reaction test avoid the possibility that a chemical reaction of the elements takes place, thanks to the presence of an exclusive valve of patent internal retention. The form of the top of the applicator allows to the worker to verify if the mouthpiece has been used previously and his new conical design improves the foam miscellany. The side ailerons that the mouthpiece incorporates allow to connect it in a rapid and simple way.

The product is provided with a few already connected flexible pipes of big length, which facilitate the beginning of the works and increase the mobility of the worker.

It is not necessary to resort to any external energy source, and the application of the product is easy, rapid and it needs few work.

img alt="proyeccion espuma poliuretano" width="200" height="151" hspace="5" align="left" src="/uploads/image/new_3.jpg" /> For these applications the polyurethane foam systems must guarantee the dimensional stability recommending systems of top or equal thickness to 35 kg/m3. Tecnopol has developed the system of foam projection of poliuretao G-2049 with an applied minimal thickness of 35 kg/m3 and a resistance to the compression of 220 KP

The polyurethane foam application in camera block, etc it provides a suitable thermal and anticondensing isolation. In the recoverings there is used only one material that for his mechanical resistance and adhesion on the treated surface improves the structural rigidity of all kinds of dividing walls, camera, etc, allowing sanear and/or to renew the protection in those places that is damaged.

It Unloads presentation: 658Espuma Rigid G-2049.pdf

his productivity Increases thanks to the advanced characteristics of the teams Tecnopol. The control panel of the system easy to learn and to use reduces the formation time and increases the productivity. The digital control panel and the functions of diagnosis and automatic braking gear avoid the product crossings. The minor number of pieces and the modular design minimizes the costs and the time invested in the maintenance. The sections of fluid of easy dismantling of the Reactor rationalize the maintenance and the technical assistance. The gun Merger is provided with less pieces, is easy to clean and highly trustworthy being has demonstrated.

Applications:

• polyurethane Froth in housings isolation
• polyurethane Froth in tubes revetments
• and tanks
• polyurethane Froth in roofs isolation
• polyurethane Froth in industrial applications
• polyurethane Froth in gatecrasher (Profiles and Meetings)

Polyurea in:

• Polyurea in filling of meetings of dilation
• Polyurea in drinking water tanks
• Polyurea in revetments and protection
• of surfaces (vans)
• Polyurea in adhesives and putties
• Polyurea in seamanship and construction
• Polyurea in wastes water treatment
• Polyurea in secondary containment
• Polyurea in waterproofing

Systems of multicomponent dosage of high yield

• Designed to offer a line of dispensers of big reliability
• finished dispensers Line with 10 models to choose
• Control panel with functions of diagnosis, automatic braking gear and notification of information of the work

to unload the new catalog it clicks here.

• GH 833 , for big projects of industrial, covered paintings, untumescent and cements of contact. It plots of Gasoline, hydraulics. A machine that pulverizes almost everything: structures of steel, bridges, housing developments, roofs, new constructions, etc. It is the ideal team for the application of our membrane impermeabilizante of polyurethane DESMOPOL.